PRICING

AUTOMOTIVE

COATED PART Typical Blast Only Price Zinc Epoxy Prime and In Stock Color Powder Coating Blast and Powder Coating Pricing
Auto Frame $300.00 $500.00 $675.00
"A" Frame Upper/Lower $25.00 ea. $40.00 ea. $55.00 ea.
Alternator Housing $25.00 $40.00 $55.00
Alloy Rims 15"-16" $40.00 $65.00 $90.00 ea.
Alloy Rims 17" $45.00 $75.00 $105.00 ea.
Alloy Rims 18" $50.00 $85.00 $120.00 ea.
Alloy Rims 19" $55.00 $95.00 $130.00
Alloy Rims 20" $65.00 $105.00 $145.00
Brake Drums $25.00 $45.00 $65.00
Brake Rotors $30.00 $50.00 $70.00
Brake Calipers $25.00 single $45.00 double $50.00 single $80.00 double $70.00 single $110.00 double
Backing Plate $15.00 $20.00 $30.00
Bumper $85.00 - $110.00 $140.00 - $175.00 $195.00 - $250.00
Drive Shaft $10.00 ft. $16.00 ft. $21.00 ft.
Engine Block $140.00 to $180.00 $250.00 to $300.00 $350.00 to $450.00
Fender Inner $45.00 $70.00 $100.00
Hood Hinges $20.00 $35.00 $50.00 ea.
Hoodhinge Springs $12.00 $20.00 $30.00
Intake Manifold V-8 $60.00 $100.00 $140.00
Oil Pan $40.00 $65.00 $95.00
Pulley Single $12.00 $20.00 $30.00 ea.
Running Boards/Step Tube sides $50.00 $85.00 ea. or $ 16.00/ft. $120.00 ea.
Rear End Housing $100.00 $165.00 $230.00
Radiator Core Support $75.00 $130.00 $185.00
Spindle $25.00 $45.00 $65.00
Springs Coil $20.00 $35.00 $50.00
Springs Leaf $10.00 ea.-$4.00/foot $17.00 ea.- $7.00/foot $22.00 ea.- $10.00/foot
Sway-Bar $20.00 $30.00 $45.00
Torsion Bar  $25.00 $40.00 $55.00
Timing Chain Cover $25.00 $40.00 $55.00
Valve Cover $25.00 $40.00 $55.00
Wire Wheels $50.00 $80.00 $115.00 ea.
Wheel Rim (15") $25.00 $40.00 $60.00 ea.
Semi Rim $45.00 $75.00 $105.00 ea.

MOTORCYCLE

Frame $150.00 $250.00 $350.00
HD Cylinder $40.00 $65.00 $95.00
HD Engine Case $90.00 $150.00 $210.00
HD Primary Cover Outer $50.00 $85.00 $120.00
HD Primary Cover Inner $45.00 $75.00 $105.00
Lower Forks $40.00 ea. $65.00 ea. $95.00 ea.
Oil Tank $30.00 $45.00 $65.00
Rim Motorcycle $60.00 ea. $100.00 ea. $140.00 ea.
Swing Arm $30.00 $50.00 $70.00
Triple Tree $50.00 $80.00 $115.00

MISC.

Mower Deck 36 " $115.00 $185.00 $260.00
ATV Frame $155.00 $260.00 $360.00
Bicycle Frame $50.00 $85.00 $120.00
Fence & Hand Rails $10.00 - $25.00/ ft. $15.00 - $40.00/ ft. $20.00 - $50.00/ ft.
Go Cart Frame $120.00 $200.00 $280.00
Heat register $9.00/ ft. $15.00/ ft. $20.00/ ft.
Lawn Chair $45.00 ea. $75.00 ea. $105.00 ea.
Love Seat $60.00 $100.00 $140.00
Metal Beds $90.00 - $150.00 $150.00 - $250.00 $210.00 - $350.00
Nuts & Bolts   $1.00 - $2.00 ea. $1.00 - $2.50 ea.
Patio Table 30-42" $60.00 $100.00 $140.00
Sand Rail $300.00 $480.00 $725.00
Snow Mobile trailing arm and front skis $40.00 $65.00 $95.00
Snow Plow Blade 7' $150.00 $250.00 $350.00
Snow Plow Blade 8' $170.00 $280.00 $400.00
Tow Hitch $50.00 $85.00 $120.00
Brush Guard $120.00 start $200.00 start $280.00 start

Ceramic High Temp Coated Parts

COATED PART

Blast & Ceramic Coat
Cast Exhaust Manifold $110.00
Header Small V8 $340.00
Muffler $80.00 - $110.00
Side Pipes $325.00
Exhaust Tubing $22.00/ft.
Pricing may be more if Received with Chrome plating or already Ceramic coated

Baking Soda Blasting and Stripping

Exterior Surfaces of automobile $650.00 - $900.00 2-5 mils thick
Hoods $85.00 - $130.00
Doors $60.00 - 90.00 ea.
Trunk Lid $60.00 - $90.00
Fenders $60.0 - $90.00 1 surface
Inner Fenders $35.00 - $40.00 ea.

We encourage immediate priming to prevent oxidation. Not responsible for flash rusting after blasting if not picked up or Primed the same day.

* CANDY APPLE TRANSPARENTS & CLEARS ADD 40% TO THE ABOVE PRICING.

ALL PARTS MUST BE DISASSEMBLED AND FREE OF HEAVY OILS, PRIOR TO OUR RECEIPT.  ADDITIONAL CHARGE FOR SANDBLASTING WILL APPLY. SANDBLASTING CHARGE IS INCLUDED FOR ALL EXHAUST SYSTEM CERAMIC COATINGS.  W. KENDALL WILL NOT BE HELD RESPONSIBLE FOR ANY OUT GASSING ON CAST PARTS.  MINIMUM CHARGE OF $50.00 PER COLOR CHANGE.

THINGS TO KEEP IN MIND ABOUT POWDER AND CERAMIC COATINGS
BOTH THESE COATINGS ARE OVEN BAKED, AND MUST BE ABLE TO HANDLE A MINIMUM OF 385 DEGREES.  ALL SEAL, RUBBER ECT. MUST BE REMOVED PRIOR TO OUR RECEIPT ALTHOUGH THESE COATINGS ARE TOUGH, THEY CAN BE SCRATCHED OR CHIPPED IF NOT HANDLED CAREFULLY.  WHEN INSTALLING TO AVOID DAMAGE, ALWAYS USE FLAT WASHERS DURING REASSEMBLY.

[Home] [About Us] [Project Pictures] [Powder Coatings] [Contact Us]